HOW TO USE

Just follow these step-by-step directions when using FAMOWOOD® Water-Based Wood Filler:

1. For best adhesion, cracks or defects should be clean and dry.
2. Press firmly into defect by hand or putty knife.
3. A thin film will dry within minutes. Lower temperatures require longer drying periods.
4. When dry, sand flush with surrounding surfaces.
5. Surfaces may be painted, varnished, lacquered, waxed, or shellacked, after FAMOWOOD application.
6. FAMOWOOD can be drilled, nailed, planed, or sawed like ordinary wood.
7. Clean tools, while still wet, with water or soap and water. If product has dried on tools, use chlorinated solvent or steam.
8. Close container after each use.

For technical support contact our Technical Service department by mail, email, or phone. Our office hours are 7:30 a.m. - 4:00 p.m. (Central) Monday through Friday. Please contact us for more information.

To request a Material Safety Data Sheet (MSDS) please send an email to msds@eclecticproducts.com