HOW TO USE

Just follow these step-by-step directions
when using Amazing EcoGlue®:

Please read all directions before using.
Surface should be clean, dry, and free
from dirt. Best when used between 60 °F
(16 °C) and 100 °F (38 °C).
Always test a small area to ensure proper
application technique and dry time.
Apply Amazing EcoGlue directly to each surface to be bonded or repaired. Initial bond forms in 20-30 minutes. 80% strength in 3 to 6 hours.
Allow the repair to dry for 24 hours for full strength. Water resistance is reached within 3 to 5 days.
Clamping wood substrates is recommended when possible. Clamp for 20 to 60 minutes.
Amazing EcoGlue is heat resistant from 0 to 250 °F
(-18 to 121 °C) intermittently.
Store unused Amazing EcoGlue at room temperature with cap tightened.

NOTE: Some substrates require light sanding for optimum adhesion. For applications exposed to sunlight, paint over.

For technical support, contact our Technical Service Department by mail, email, or phone. Our office hours are 7:30 A.M. - 4:00 P.M. (CST) Monday through Friday. Please contact us for more information.

To request a Material Safety Data Sheet (MSDS) please send an email to msds@eclecticproducts.com.

Be good to the Earth, yourself and your family.

Find out more:
What to Use EcoGlue On
How to Use Amazing EcoGlue