HOW TO USE

Just follow these step-by-step directions when using Amazing QuickHOLD®:

  1. Please read all directions before using. Amazing QuickHOLD should be used in a well-ventilated area.
  2. Surface should be clean, dry, and free from dirt.
  3. Always test a small area to ensure proper application technique and dry time.
  4. Apply Amazing QuickHOLD directly to each surface to be bonded or repaired. Allow Amazing QuickHOLD to harden, 5-10 minutes, before bringing surfaces together.
  5. Allow the project to cure for 2-6 hours. Product can be used between 50 °F and 90 °F (10 °C and 32 °C). Dry time decreases when used between 70 °F and 90 °F (21 °C and 32 °C).
  6. Water resistant immediately upon application. Resistant to gasoline, alcohol, paint thinner and most solvents.
  7. Pain over Amazing QuickHOLD for UV resistance.
  8. Keep threads at the neck of the tube free of Amazing QuickHOLD residue.
  9. Store unused Amazing QuickHOLD at room temperature with cap tightened.

NOTE: Amazing QuickHOLD may damage finished surfaces. Avoid such contact until Amazing QuickHOLD is completely dry.

For technical support, contact our Technical Service Department by mail, email, or phone. Our office hours are 7:30 A.M. - 4:00 P.M. (CST) Monday through Friday. Please contact us for more information.

To request a Material Safety Data Sheet (MSDS) please send an email to msds@eclecticproducts.com.