|
Check out our other |
Anti-Skid Epoxy with Grit—
|
||||||||||||||||||||||||||||||||||||
| All Purpose and Bath, Tub & Tile: | |
| Ease of application | Convenient aerosol spray can. Ideal for coating smaller or irregularly shaped surfaces and designed for interior and exterior use. |
| Substrates | Properly prepared wood, concrete, metal, fiberglass, tiles, porcelain, and more. |
| Color | All Purpose: Clear or white; Black, Gray and Safety colors available with minimum batch sizes. Bath, Tub & Tile: Clear ONLY. |
| Grit | No sharp edges and friendly on bare feet. |
| Coverage | Up to 15 sq. ft. per can. |
| Application Temperature | Up to 90 °F / 10 to 32 °C. |
| Dry to Touch | Dries quickly in 10 to 20 minutes at 77 °F / 25 °C. |
| Dry to Handle | Can be handled or recoated in approximately 1 hour. |
| Dries Hard | 24 hours at 77 °F / 25 °C before subjecting to heavy foot traffic. |
| Permanent | Yes, can be removed by sanding. |
| Water Resistance | Yes, unique epoxy coating (not recommended for garage floors or wood surfaces subjected to standing water, or to be submersed under water for an extended period of time). |
| CFCs (Chlorofluorocarbon) | Contains no CFCs or other substances which deplete the ozone layer. |
| Lead Free | Pigments contain no lead. |
| VOC % | Meets VOC Standards; 80% - Slip Resistance Coating. |
| Chemical Resistance | Excellent |
| Gas & Oil Resistance | Excellent |
| Clean Up | Clean valve immediately after each use by holding can upside down and spraying until clear gas comes out (3-5 seconds). If spray valve becomes clogged, pull off and clean in lacquer thinner. |
Amazing GOOP Anti-Skid Epoxy went through a Salt Fog test against a competitor product and these pictures show the results after 168 hours of exposure in a harsh environment.
ANTI-SKID vs COMPETITOR — 168 Hour Salt Fog – August, 2009
Find out more:
back to Introduction
How To Use
Troubleshooting Tip: Spray Nozzle
Product Video
Sell Sheet (All Purpose)
Sell Sheet (Bath, Tub & Tile)
Technical Data Sheet
Anti-Skid with Grit MSDS — EN
