EBO store icon EBO store link


HOW TO USE

Just follow these step-by-step directions when using
Amazing EcoGlue® Craft:

  1. Please read all directions before using.
  2. Surface should be clean, dry, and free from dirt. Best when used between
    60 °F (16 °C) and 100 °F (38 °C).
  3. Always test a small area to ensure proper application technique and dry time.
  4. Apply Amazing EcoGlue Craft directly to each surface to be bonded or repaired. Initial bond forms in 20-30 minutes. 80% strength in 3 to 6 hours.
  5. Allow the repair to dry for 24 hours for full strength. Water resistance is reached within 3 to 5 days.
  6. Clamping wood substrates is recommended when possible. Clamp for 20 to 60 minutes.
  7. Amazing EcoGlue Craft is heat resistant from 0 °F to 250 °F (-18 °C to 121 °C) intermittently.
  8. Store unused Amazing EcoGlue Craft at room temperature with cap tightened.

NOTE: Some substrates require light sanding for optimum adhesion. For applications exposed to sunlight, paint over.

For technical support, contact our Technical Service Department by mail, email, or phone. Our office hours are 7:30 A.M. - 4:00 P.M. (CST) Monday through Friday. Please contact us for more information.

To request a Material Safety Data Sheet (MSDS) please send an email to msds@eclecticproducts.com.